Coextruding a stripe of radiopaque plastic into a catheter, for example, improves x-ray quality as the catheter moves through a vein without compromising the effectiveness of the catheter itself. Coextrusion can also reduce costs by using recycled and reground scrap inside virgin material for handrails, fences and other applications. The process can be seen in projects as diverse as tubing and structural components or air blown food containers.
The Coextrusion Process
In standard extrusion, solid plastic pellets are gravity fed into a forming mechanism, where jacketed compression screws melt and feed the materials into a die. By contrast, coextrusion involves multiple extruders forming layered or encapsulated parts. Sometimes five or more materials are used in a single cycle, with each extruder delivering the precise amount of molten plastic needed for the operation..
Unlike ordinary plastic mixing, each individual plastic retains its original properties, but is combined into a compound-material part. If mixed prior to extrusion, the characteristics of the individual materials may be altered, but the end result is a homogeneous product.
Not all plastics are suitable for coextrusion because some polymers will not adhere to others, although introducing a conductive middle layer can often solve this problem. Plastics with drastically different melting temperatures are also unsuitable for the process, as degradation will occur in the lower melting material. Finally, PVC and acetals should never be coextruded together because of the potentially violent reactions that can occur when they are joined.
The multi-colored drinking straw is a good example of coextruded tubing’s design features. Striped tubing also serves many purposes in the medical field, in which stripes and colors can denote different chemicals. Coextrusion can produce internally hardened tubes through which a cable can be run while retaining the tube’s flexibility. Other tubes benefit from a high performance liner impervious to corrosives, or an inexpensive coating to add bulk and stability. In addition, plastic fiber optic cables are composed of a coextruded cable and jacket.
Coextruded Structural Units
Plastic is sometimes used as a substitute for wood. Manufacturers can create decking, boat docks, fences and dimensional components with “plastic lumber,” which has some advantages over natural wood. Coextrusion is a cost-effective method of fabricating many of these artificial materials. It can add titanium dioxide, a weather resistant material, to exterior structural plastics or produce decking with an inner layer of recycled plastic.